蚯蚓-微生物协同作用过程中的微生物特性

在环境污染治理领域,被誉为"生态型工程师"的蚯蚓在污水/污泥资源化处理与处置,以及土壤的生态修复中备受关注。蚯蚓通过掘洞、摄食、分泌黏液和排泄蚓粪等方式调控系统中微生物的数量、活性及群落结构,与微生物协同互作强化了生物系统中物质转化与能量流动关系。蚯蚓-微生物协同共生的相互依存关系是此类技术展现低耗高效和生态友好特点的关键。通过综述经人工强化的蚯蚓-微生物互作生态系统中,蚯蚓对微生物的量、活性、群落结构以及食物网的影响,探讨了该生态系统中物质转化和能量流动的特点,并展望了蚯蚓-微生物互作技术研究及应用的发展方向。     

焙烧温度对CeO_2(ZrO_2)/TiO_2选择性催化脱硝性能的影响

采用溶胶-凝胶法并以不同温度焙烧制备一系列CeO_2(ZrO_2)/TiO_2(CZT)催化剂,考察了CZT催化剂固相结构、酸量、比表面积等性能与催化活性的关系。采用XRD、BET、NH3-TPD、H2-TPR以及XPS等表征技术对催化剂进行表征。结果表明:焙烧温度为450℃时CZT催化剂具有最高的催化活性,其在240~400℃的温度窗口内活性均高于90%,且具有较好的抗水和抗硫中毒能力。随着焙烧温度的提高,催化剂表面的Ce和Zr原子进入体相晶格且Ce0.5Zr0.5O2向Ce0.75Zr0.25O2转变,导致催化剂的储释氧能力和氧化还原性能降低。另外,锐钛矿和金红石型TiO_2晶粒尺寸的增加,催化剂的有效比表面积和总酸量降低,因此CZT催化活性随着焙烧温度的提高而有所降低。换言之,大的比表面积、良好的氧化还原性能、表面Ce4+的富集以及酸性位的增多均有利于NH3-SCR活性的提高。     

Distribution characteristics of poly- and perfluoroalkyl substances in the Yangtze River Delta

In this work, a method was developed and optimized for the analysis of polyfluoroalkyl and/or perfluoroalkyl substances(PFASs) content in surface water and sediment samples with high instrumental response and good separation. Surface water and sediment samples were collected from the Yangtze River Delta(YRD) to analyze the distribution characteristics of perfluoroalkyl carboxylic acids(PFCAs), perfluoroalkane sulfonic acids(PFSAs), perfluoroalkyl phosphonic acids(PFPAs), perfluoroalkyl phosphinic acids(PFPiAs), and polyfluoroalkyl phosphoric acid diesters(di PAPs). The results showed that the total concentrations of PFCAs and PFSAs in YRD varied from 31 to 902 ng/L. PFCAs(≥ 11 carbons) and PFSAs(≥ 10 carbons atoms) were not detected in any surface water samples. The mean concentrations of all PFCAs and PFSAs in surface water from the sampling areas decreased in the following order:Yangtze river(191 ng/L) ≈ Taihu lake(189 ng/L) Huangpu river(122 ng/L) ≈ Qiantang river(120 ng/L) Jiaxing urban river(100 ng/L). Strong significant(p 0.05) correlations between the concentrations of many of the compounds were found in the sampling areas, suggesting a common source for these compounds. Only perfluorooctanoic acid(PFOA) was observed in all sediment samples, at concentrations varying from 0.02 to 1.35 ng/g. Finally, detection rates of two di PAPs were only 8% and 10%, respectively and the concentration of di PAPs was two to three times lower compared to PFCAs and PFSAs.     

双层内衬改造技术在埋地油罐中的应用研究

介绍了共结构双层内衬改造技术,其结构共由5层组成,分别为基础层(防腐层和加强密封层组成)、中空监测层、内衬加强层、防油防腐层和导静电层;采用该技术可对加油站埋地单层钢制油罐进行双层改造,经过罐内清洗、喷砂除锈、基础层施工、中空监测层施工、内衬加强层施工、防油防腐层施工、导静电层施工和整个系统气密性的保压检测,完成双层内衬油罐的现场改造;采用GB30040规定的Ⅰ级真空泄漏监测方法,可以在油品泄漏前报警,实现埋地油罐整体安全水平的提升,具有重要的现实意义。     

地表参数对面源大气预测结果的影响性分析研究

为了研究地表参数取值对AERMOD中面源模拟预测浓度值的影响,文章通过改变粗糙度、反照率和波文比的取值来进行不同地表参数与预测结果的相关性分析,同时采用正交试验法来研究不同地表参数对预测结果的敏感性.相关性分析表明,不同地表参数和预测结果有着很高的相关性.敏感性分析表明,反照率数值变化对小时最大落地浓度的敏感性最大,粗糙度数值变化对日均和年均最大落地浓度的敏感性最大.通过研究可以看出在面源大气预测过程中合理选择地表参数值是准确预测的前提.     

污泥生物炭制备吸附陶粒

以城市污泥热解产生的生物炭(BC)与高岭土(KL)为原料制备吸附陶粒(SKC),研究其对环丙沙星(CIP)的吸脱附性能,开展吸附动力学和等温吸附特性研究,结合形貌、孔结构、物相组成、表面电位探讨其吸附机制,利用TCLP法研究重金属浸出特征.结果表明BC与KL以6∶4的质量比混合造粒,经1 050℃烧结5 min得到的SKC对CIP有明显的吸附效果,去除率达65.34%;SKC对CIP的吸附符合二级动力学模型,在不同质量浓度下的吸附特性适用于Freundlich等温吸附模型,吸附过程同时存在物理和化学吸附.SKC具有良好的孔隙结构,物相组成以硅铝氧化物、铁氧化物和金属磷酸盐为主,既能降低重金属的浸出毒性又具有良好的CIP吸附去除效果,有望为处理废水中高浓度CIP提供一种低成本可回收的吸附材料,也为BC的规模化安全利用提供了新思路.     

磷酸根和镉离子在羟基铁改性膨润土表面的协同吸附机制研究

聚合羟基金属-粘土矿物复合物广泛存在于自然环境中,对重金属阳离子和含氧酸根阴离子均有很好的吸附能力,因此对这些化合物的环境迁移过程及污染控制具有重要影响.研究采用FeCl₃和Na₂CO₃共同改性膨润土,制备了羟基铁－膨润土复合物（HyFe-Bent）.XRD和孔结构分析结果发现,HyFe-Bent的d₀₀₁由原土的1.52 nm增加到1.81 nm,比表面积由原土的52.2 m²·g^-1增大到108.4 m²·g^-1.将HyFe-Bent用于同时吸附水中磷酸根（P）和镉离子（Cd）,结果表明,在实验条件下P和Cd在HyFe-Bent上表现出明显的协同吸附效应,溶液pH升高可促进Cd的吸附但降低P的吸附.此外研究了P和Cd吸附次序对它们吸附性能的影响：在先吸附P的体系中两种物质的吸附性能与同时吸附体系相当,而在先吸附Cd的体系中吸附性能则明显低于同时吸附体系.由此提出P和Cd协同吸附的原理是多种吸附机制共存：除了配体交换和离子交换作用,它们在HyFe-Bent表面还发生了表面沉淀作用,可能形成了Fe-P-Cd三元络合产物.论文研究结果可为了解重金属和含氧酸根复合体系的环境行为及污染控制提供新信息.     

Sulfur-containing amino acid methionine as the precursor of volatile organic sulfur compounds in algea-induced black bloom

After the application of methionine, a progressive and significant increase occurred in five volatile organic sulfur compounds (VOSCs): methanethiol (MeSH), dimethyl sulfide (DMS), dimethyl disulfide (DMDS), dimethyl trisulfide (DMTS) and dimethyl tetrasulfide (DMTeS). Even in the untreated control without a methionine addition, methionine and its catabolites (VOSCs, mainly DMDS) were found in considerable amounts that were high enough to account for the water’s offensive odor. However, blackening only occurred in two methionine-amended treatments. The VOSCs production was observed to precede black color development, and the reaching of a peak value for total VOSCs was often followed by water blackening. The presence of glucose stimulated the degradation of methionine while postponing the occurrence of the black color and inhibiting the production of VOSCs. In addition, DMDS was found to be the most abundant species produced after the addition of methionine alone, and DMTeS appeared to be the most important compound produced after the addition of methionine+glucose. These results suggest that methionine acted as an important precursor of the VOSCs in lakes suffering from algea-induced black bloom. The existence of glucose may change the transformation pathway of methionine into VOSCs to form larger molecular weight compounds, such as DMTS and DMTeS.     

Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.